1)
This is quite normal. It's a technical fact.
Your card only has one (digital) tuner so you only can receive one digital transport-stream at the moment.
If you want to receive programs from different transponders you'll need a 2nd card that can be tuned to another / different frequency at same time.
2)
DVBDream ist designed to receive digital signals only. If you want to watch analog tv, you have to use the original software.
3)
That belongs to the kind of the remote is refelected in the (windows) system.
If the remote is installed as an HID (Human Interface Device) you can use the 'TWINHAN' in DVBDream.
Maybe its also possible that the remote only works internal with the orig- software.
I can't tell you more about because i don't own / know this card.
Thank you very very much for the answers.
But my pci card digital has 2 digitalreceivers and 2 analog receivers. With original software is possible to see 2 channels with different frequencies. Is it possible to enable all 2 digital receivers in dvbdream or i can enable only one of it ?
I hope that you understand my poor english.
Do you mean THIS CARD ?
I think there is a kind of misunderstanding....
Who told you that this card has 2 digital AND 2 analog tuners ?
I am totaly shure that it has only 1 of each type !
If PINNACLE says
' ... PCTV Dual Hybrid Pro PCI Express is a dual-tuner PCI Express x1 card for digital (DVB-T) and analogue TV (antenna and cable) ...'
and
'... Enjoy two programmes at the same time ...'
it should mean that you can watch a digital AND a analog programm at the same time - not watching 2 digital or 2 analog programs simultaniously.
In other software i can select 2 digital tuners and 2 analog tuners. and on the rear of the card there are 2 antenna connectors.
By the original software i can see 2 digital channels at the same time. And i have only an antenna connected to the tv tuner. So i tought that it was possible olso with dvbdream.
On the pinnacle home page it writes:
PCTV Dual Hybrid Pro PCI Express Overview
PCTV Dual Hybrid Pro PCI Express is a dual-tuner PCI Express x1 card for digital (DVB-T) and analogue TV (antenna and cable). It comes with Pinnacle TVCenter Pro software and ASD technology for a more versatile digital TV and PVR experience. It allows you to watch, TimeShift and record two DVB-T and/or analogue programmes (TV or radio) at the same time.
Do you think that i will be able to watch 2 channels at the same time?
Hmmm, crazy - haven't heard about this feature that the card has really 2 digital tuners....
You can try to select the second one like this:
Menu Options > Device.
Select the BDA-Device.
Below the list on the left side there is a number field and an up/down-spinbutton.
Is it possible to change the number from 1 to 2 ?
If yes, you can select the second tuner !
To use DD with 2 tuners, you have to install DD twice in different folders !
It is NOT possible to use both tuners from single running DD at the same time !
Make sure that you have 2 Desktop-icons that will link to the different folders.
Start Installation 1 and select device No. 1. Close it.
Do the same for the second installtion and select device No. 2
You can also use a command line like this:
dreamstart.exe /device=1
and
dreamstart.exe /device=2
For other command-line params take a look to the help file in subfolder \DOCS
Hmmm, crazy - haven't heard about this feature that the card has really 2 digital tuners....
You can try to select the second one like this:
Menu Options > Device.
Select the BDA-Device.
Below the list on the left side there is a number field and an up/down-spinbutton.
Is it possible to change the number from 1 to 2 ?
If yes, you can select the second tuner !
To use DD with 2 tuners, you have to install DD twice in different folders !
It is NOT possible to use both tuners from single running DD at the same time !
Make sure that you have 2 Desktop-icons that will link to the different folders.
Start Installation 1 and select device No. 1. Close it.
Do the same for the second installtion and select device No. 2
You can also use a command line like this:
dreamstart.exe /device=1
and
dreamstart.exe /device=2
For other command-line params take a look to the help file in subfolder DOCS
You are great!!!!!!!!!!!!!!
I have tried as you told me and it works fine.
The only thing that doesn't work is remote control. But it isn't usb type so i think that it work only with the original software.
I thank you very very very much for your help.
Es ist / sind gerade 2 registrierte(r) Benutzer und 68 Gäste online. Neuester Benutzer: Dogol
Mit 580 Besuchern waren am 06.01.2010 - 18:31 die meisten Besucher gleichzeitig online.
Registrierte Benutzer online: Dogol, Raven009AdministratorModeratorMemberUser
Suche
Forum - Suche
Forumticker
Aktuelle Umfrage
Birthday - Box
Kalender